2020-04-01から1ヶ月間の記事一覧
I was about to throw away like trash one of the previous batches though, something struck my mind that I tried it over a drip bag and turned out it was one of the best batches with that roasting degree; at least when it is served by that c…
My old fuji have only 5 blades on exhaust/cooling fan which means that the wind could be more or less 10% weaker than now standard 6 blade and 25-30% less than the 8 bladed special model. To compensate this I set the inverter frequency at …
Its tuff enough to rotate at 132hz or 2.5x speed If I adjusted the drum gap right, the drum might not have stopped during the previous batch. But it is not good to work on a machine caring about or fearing that it could stop at anytime, I …
Some survery on antibody made in USA suggest that approx. 50 to 80 times of known number of infected person may have already caught ncov. I wonder what it will be like in this country.
There left a green leaf on the branch of a coffee tree. Saigo no ichiyou I found its lost by today. literally and litterary, gone with the wind
Since mid February. I had been felling something wrong in my sence of taste and smell, I could not enjoy the flavor that comes out of black & brown beans and also my physical condition was not so well that I stopped roasting and went on re…
It stopped again whilest I was going to start roasting the mandelin G1. In fact i had to assist the motor by grabing the belt several times.Guess, I must have poured in the raw beans much gentely. It proved that the density of the mandehli…
Inverter driven exhaust/cooling fan In the first place, I didnt want to change the motor this early because I have been so short of resource that I wanted to go on with what I had. But the incident happed one day when I was checking the ga…
I ve bn working on the roasting stuff for quite a while and found out that the ideal roasting I have been looking for largely depends on the quality of the raw bean. It has to be old traditional seeds , typica or like and refined then trea…